Page 5 - Synatek - Volution 2017

Volution TM

AFFECT

Volution Affect (15-0-0 16% S) is a urea-sulfuric reaction product, produced in our
state-of-the-art, controlled reaction facility. Volution Affect is designed as a spray equipment
cleaner, soil conditioner, water treatment product and irrigation system cleaner. It is also a
supplemental supply of urea-based nitrogen and sulfur. Volution Affect contains 15% urea
Volution TM
AFFECT
MAINTENANCE EXAMPLE: inject enough product to lower the pH to
GUARANTEED ANALYSIS 6.0 to 6.5 or to remove 50% of bicarbonates. Exact injection rates
Total Nitrogen (N)................................................15.0% should be determined via laboratory tests determining irrigation
acidifying agent.
15% Urea Nitrogen

Sulfur (S)..............................................................16.0% suitability and/or titration curves using Volution Affect as the nitrogen and 16% sulfur while providing a safer alternative to pure acid products.
Human Hazards: Causes severe eye, skin, and lung irritation. Harmful if
PRECAUTIONARY STATEMENTS
Sulfuric acid equivalence: 49% contact with spray and avoid breathing spray mists. Wear suitable
Derived from: monocarbamide dihydrogensulfate.
swallowed. Chemical goggles or a full face shield should be worn. Avoid
non-nylon plastic apron, gloves, pants, and boots. Wash with soap and
protective equipment to protect skin, such as synthetic rubber or
KEEP OUT OF REACH OF CHILDREN water after skin contact. Remove contaminated clothing and wash
Environmental Hazards: Do not contaminate water by cleaning of
before reuse.
equipment or disposal of wastes.
DANGER
READ ENTIRE LABEL BEFORE USING STORAGE / HANDLING / DISPOSAL
STORAGE: Store in original containers only. Keep containers tightly
GENERAL INFORMATION
Volution Affect is a low pH solution of urea and sulfuric acid. This closed when not in use. Store in a cool, dry well ventilated area,
preferably in a locked storage area away from children, feed, food
products and seed.
product can be used to correct pH, alkalinity, carbonate and bicarbonate
water pH, manage bicarbonates and help maintain irrigation systems. HANDLING: Avoid contact to skin, eyes, and mucous
issues in your irrigation and tank mix water. Volution Affect will reduce
irrigation water is less than pH 6.0 and/or not in accordance other product. membrane. Wash hands thoroughly after handling this
Do not apply as a foliar application when nal pH of tank mix or
products in your program. If your application pH is less than pH 6.0, you
should perform a test application to ensure that applied water and DOT if transported by motor vehicle or railcar in packaging that will
DOT Corrosive to aluminum and mild-steel. Not regulated by
chemistry is compatible at your specic target pH and will not interact
adversely with tank mix or residual chemistry on the target crop. 49 CFR 173.154(D). not react dangerously or be degraded by this material,
GENERAL RECOMMENDATIONS
DISPOSAL: Dispose of empty containers by triple rinsing or
equivalent and discard empty containers in accordance with
current Local, State and Federal regulations. Do not
Volution Affect is intended for application through irrigation systems. It
may be used to prevent emitter/head clogging and to mitigate high contaminate water, food or feed sources by cleaning of
APPLICATIONS AND USE equipment or disposal of waste or rinsate.
bicarbonate levels in the irrigation water.
For most vegetable and tree crops: Inject 1 to 3 gallons per acre, every 7
WARRANTY
to 21 days with ample irrigation water to ensure movement to root zone. SELLER WARRANTS THAT THE PRODUCT CONFORMS TO ITS
been reduced below 6.0 pH without rst performing a check as outlined PURPOSE STATED ON THE LABEL WHEN USED IN ACCORDANCE
Do not use on stone fruit. Do not apply over foliage when water pH has
CHEMICAL DESCRIPTION AND IS REASONABLY FIT FOR THE
NEITHER THIS WARRANTY NOR ANY OTHER WARRANTY OF
WITH DIRECTION UNDER NORMAL CONDITIONS OF USE.
above. Turfgrass, lawns and fairways: Inject 0.5 to 5 gallons per acre,
according to recommendations in your nutrient management plan. MERCHANTABILITY OR OF A PARTICULAR PRODUCT EXPRESSED
per application, as needed, based upon irrigation suitability tests, or
OR IMPLIED EXTENDS TO THE USE OF THIS PRODUCT
irrigation water. Exact injection rates should be determined via CONTRARY TO LABEL CONDITIONS, OR UNDER CONDITIONS NOT
Typical injection rates are 1 gallon per 5,000 to 20,000 gallons of
REASONABLY FORESEEABLE TO THE SELLER; AND BUYER
using Volution Affect as the acidifying agent. ASSUMES THE RISK OF ANY SUCH USE.
laboratory tests determining irrigation suitability and/or titration curves
CLEAN OUT / SHOCK T TREATMENT: Inject enough product to lower Net Weight: 12.6 Lbs./Gallon
IRRIGATION: (Including Drip, Trickle, Mist and Sprinkler systems).
system with water only, through a line cleanout tting, avoiding contact
the pH to 2 to 2.5 for a duration of 3 to 6 hours. At the end of cycle, ush
with foliage.
737 Hagey Center Drive Souderton, PA 18964 888-408-5433 SynaTek R • Neutralize the negative effects of high bicarbonate and carbonate levels in irrigation water
synateksolutions.com PEOPLE POWERED. SOLUTIONS DRIVEN.
and the soil solution
• Lower pH of irrigation water and soil water
• Maintain the solubility of Ca and Mg in irrigation and soil water
• Dissolve calcium carbonate and magnesium carbonate salts on the surface (crusts) and in
the soil prole
• Improve the ability of soil-applied Ca-based amendments to produce soluble Ca
• Flocculate dispersed colloidal-sized clay particles
• Improve percolation and inltration characteristics of the soil prole
• Clean and remediate clogged irrigation lines and emitters
Poor quality irrigation water? Poor cation exchange? Not getting efficiency out of Mg and Ca amendments?
Reduced porosity and drainage? High sodium and / or bicarbonates?
Volution Affect IS YOUR ANSWER!
In many cases, soil issues start with irrigation water. Volution Affect can be used
as a key tool to restore the ratio of Ca, Mg, and Na in the soil. Excess sodium
can degrade the soil structure and displace other key elements from the soil
particle. Volution Affect will assist in ushing out undesirable Na and will
“burn off” bicarbonates.
Volution Affect (H+) + HCO - (Carbonate) CO + H O
2
2
3
SynaTek R
PEOPLE POWERED. SOLUTIONS DRIVEN.